CPAP Full Face Mask Frame System for Amara View, Including Frame, Mask, Headgear, and Elbow for Philips Respironics Amara view

Product Information

The mask for Amara View still covers the mouth and nose, but compared to the original semi-enclosed mask, our full-face mask is better sealed and less prone to air leakage.
The replacement CPAP mask cushion for Amara View is composed of advanced liquid silicone material from Japan, and PC material from Bayer of Germany.
We have simplified the composition of the product by changing the original short tube used for quick release and the connecting breathing tube.
Our headgear for Amara View is made of softer, lighter and stronger material, and the inner surface of the headgear is gentle and comfortable, which can reduce the red marks caused by the pressure from the mask.
We have improved the magnetic clips, unlike the original ones, we have removed the middle column, which is easier to assemble and disassemble.

Features

• Comfortable fit: Comfortably fit all kinds of facial profiles. Strictly designed to keep sealed no matter at any airflow pressure. And Wake up without red marks.
• Quick-release elbow: Can be quickly disconnected from the frame, easy to separate the tube, more convenient to us in night.
• Stable and durable frame: Made of higher quality materials to make you more comfortable and get better sleep experience, and long use for less waste.
• Effective fixation: 4pcs clips have a strong force so they can achieve effective fixation during full night sleep. Simple design makes installation and disassembly easier.

Specifications

Important Tips

1. This product does not fit the original short tube, frame and mask.
2. Use of products with magnetic components is contraindicated in patients with the following pre-existing conditions: A metallic hemostatic clip implanted in your head to repair an aneurysm; Implants to restore hearing or balance that have an implanted magnet;
3. This product does not contain natural latex.
4. Please do not use ozone disinfection equipment to disinfect this product.
5. The product contains small objects like magnets. Please pay attention to preventing children from swallowing them by mistake.
6. Please make sure that the device is blowing air when using the mask, or the mask should not be used. In some cases, rebreathing the exhaled air for longer than several minutes may lead to suffocation.
7. Magnets are used on the Magnetic clips. Ensure the Magnetic clips are kept at least 6” away from any active medical implant to avoid possible effects from localized magnetic fields. The magnetic field strength is less than 400mT.
8. This product does not contain any hazardous substances and may be disposed of with your normal household refuse.

FAQ

It makes noise when wearing?

Vent is blocked or partially blocked. – Use a soft bristle brush to clean the vent.
Vent is wet. – Ensure the vent is dry before use to prevent condensation.
Install elbow or mask improperly – Check whether mask has been installed correctly.

The mask is leaked or is uncomfortable?

Wear mask improperly – Please make sure there is no fold on the mask when wearing it.
Choosed wrong size of mask. – Please select the appropriate size according to the size template. Note that size across different masks is not always the same.
Headgear is too loose or too tight. – Adjust the headgear strap or replace the headgear size.

It leaks between hose and elbow?

Incorrect diameter of breathing tube. – The short tube is compatible with 22mm breathing tube.
Breathing hose is aging. – The aging of the breathing hose will lead to a loss of elasticity at the connection. Please replace the breathing hose according to the time recommended by the supplier.

Product Instruction

Before first use, please clean the product as mentioned in the Cleaning Section.
Step1: Pass the top headgear strap through the buckles and fold backward.
Step2: Insert the middle headgear strap through the frame slot and fold it to secure it. Secure the lower headgear strap to the magnetic clips.
Step3: Align the round opening of the mask with that of the frame and push hard to secure the mask and frame together.
Step4: Fix the magnetic base on the side of the frame. If you hear a click and can rotate, it means that it is installed successfully.
Step5: Hold the mask against your face and pull the headgear over your head.
Step6: Attach the magnetic clips on the lower headgear straps to magnetic base on the frame.
Step7: Adjust the headgear strap until the mask snugly and firmly fits your face, and then attach the fastening tabs.
Step8: Connect hose with elbow, and push elbow into the frame. The elbow can rotate smoothly if it is installed correctly.
Step9: If you feel uncomfortable when the headgear is too close to your ears, please adjust the fastening tabs right above your head.

-Trademark and Brand Disclaimer-

The trademarks, logos, and brand names (collectively referred to as “Trademarks”) used or mentioned on this website are the property of their respective owners. The use of these Trademarks is solely for the purpose of identification, description, and contribution to the recognition of their respective owners. The inclusion of these Trademarks does not imply any endorsement, sponsorship, or affiliation with this website.

We respect intellectual property rights and strive to ensure that the use of Trademarks is accurate and lawful. If you are the owner of a Trademark and believe that its use on this website might infringe upon your rights, please contact us through the provided contact information. We will take prompt action in accordance with applicable laws and regulations.

By continuing to use this website, you indicate that you have read, understood, and agreed to abide by the terms of this Trademark Disclaimer.