Water Chamber for AirSense 10 and AirCurve 10 Series

Product Information

This hose adapter is necessary to ensure that your device functions properly while the user’s CPAP system is connected to the CPAP cleaning machine for disfection.

Features

• Perfect Fit: The tubing adapter did fit all the way into holes on water tub. They are shaped same and can fit where intended. They fit in just enough to snap to place.

• Avoid Air Leaks: The tubing adapter is well made. It is designed to reuse the seal from the original water tub. When the seal has been installed the water tub is just as leak proof as the original. The tubing adapter needs to be used with the SC1200, otherwise the silicone tube hole connected to the SC1200 on the top of the lid will leak, which will make your item receive an air leak warning.

• Easy To Use: The adapter seemed to insert a bit more easily , the tubing adapter did close as securely.

• Come with more silicone tubes of the same size for easy replacement; (choose the set B)

Specifications

Important Tips

1. Rubber gasket not included;
2. The original packaging bag can be kept so that you can store it when you don’t use it or when you travel.
3. Please clean the Tubing Adapter before use;
4. The tubing adapter is replaced every 6 months.

FAQ

Does this come with the gasket?

– No, rubber gasket not included. There is a gasket in the original water container.

Does this adapter fit for the resmed airsense 11 machine?

-The water chambers are the same so this work.

How do you attach a check valve to this adapter？

-The check valve goes on the hose BETWEEN the hose coming from the back of your CPAP device and the hose going into the water tub. There is an arrow on the check valve that shows which end it goes in each.

Product Instruction

Step1: Remove the original water tub and take down the original rubber gasket;
Step2: Install the original rubber gasket on the Tubing Adapter;
Step3: Connect the Tubing Adapter to the water tub and install the water tub to the machine.