CPAP Nasal Mask Set for ResMed AirFit N20, Including N20 Nasal Cushion, Headgear, Short Tubing, Magnetic Clips for AirFit N20(Without Frame)

Product Information

Replacement CPAP Kit for ResMed AirFit N20 improved short tubing which can be rotated in 3 places and is more flexible. The material of the short tube for ResMed AirFit N20 is improved, redicing the elasticity of the short tube, making it harder and stronger, and not easy to be pierced.
We have removed the origianl stepped exhaust structure, but remain the same size and numbr of vent holes, enabling it to function as originals.
The nasal pillow for ResMed AirFit N20 is soft and comfortable, reducing the pressure on the face. To use of soft silicone material allows a better fit for contour of nose to reduce the occurrence of air leakage.

Features

• Great-Value – Includes most you need for replacement, cost-effective to cut down replacing costs while fitting snugly to ensure great seal and wearing comfort. (Not include Frame)
• Maximize Using comfort – CPAP Cushion delivers air to a wider area, rather than directly into nostrils, effectively preventing nostril pains due to high-pressure setting.
• Perfect for Side Sleeps – There is three size (S,M,L) to choose, not pressing against your face when you sleep on your side. Besides, it is light in weight. You may not feel it sitting on nose when used.
• Quick-release & Rotatable Tubing – 18.5 inches tubing owns a quick-release connector for easy removal and two 360-degree swivels to help pivot and avoid tangles.
• Adjustable Strap with Quick-release Clips – Soft and breathable strap offers ultra comfort and quick-release clips speed up the process of putting on and off the whole assembly.

Specifications

Important Tips

1. Store the product in a dry place out of direct sunlight.
2. This product does not contain any hazardous substances and may be disposed of with your normal household refuse.
3. This product does not contain natural latex.
4. Discontinue using this nasal pillow if you have any adverse reaction to the use of the nasal pillow, and consult your physician or sleep therapist.
5. The nasal pillow should not be used unless the device is turned on. Once the nasal pillow is fitted, ensure the device is blowing air, Rebreathing of exhaled air for several minutes can, in some circumstances, lead to suffocation.
6. Please do not use ozone disinfection equipment to disinfect this product.
7. Users who are unable to remove the mask by themselves must use the mask under supervision. The mask may not be suitable for those predisposed to aspiration.

FAQ

It makes noise when wearing?

Vent is blocked or partially blocked. – Use a soft bristle brush to clean the vent.
Vent is wet. – Ensure the vent is dry before use to prevent condensation.
There’s grease on the nasal pillow. – Please clean the nasal pillow after each use to remove the facial grease on it.
Pillow is assembled incorrectly. – Please reassemble or wear the pillow as mentioned in the Assembly Section.

Pillow leaks or is worn uncomfortably?

There are folds on pillow. – Please wear the pillow according to the Assembly Section to avoid wrinkles on pillow.
Choosed wrong size of nasal pillow. – Please select the appropriate size for a snug fit.
Headgear is too loose. – Readjust headgear straps or change to a smaller size of the headgear.

It leaks between hose and short tube?

Incorrect diameter of breathing tube. – The short tube is compatible with 22mm breathing tube.
Breathing hose is aging. – The aging of the breathing hose will lead to a loss of elasticity at the connection. Please replace the breathing hose according to the time recommended by the supplier.

Product Instruction

Step1: Align the round opening of the pillow with the opening of frame, and then push hard to fix pillow and frame together.
Step2: Lead the upper headgear strap through frame slots and attach the fastening tabs and fix the magnetic clips onto the lower headgear straps.
Step3: Hold the pillow against your nose and make sure there are no folds on the pillow, and then pull the headgear over your head. (Please put on the pillow first to avoid wrinkles or folds caused by movement.)
Step4: Fix lower headgear straps onto the magnetic base of the frame through the magnetic clips. Adjust the fastening tabs of the upper and lower headgear straps to get the pillow snugly sited on your nose.
Step5: Align the elbow of short tube with the frame opening, slightly push into the frame, and then connect short tube with a 22mm hose. A well-installed elbow can rotate smoothly.
Step6: A well-sited pillow can create a great seal.

-Trademark and Brand Disclaimer-

The trademarks, logos, and brand names (collectively referred to as “Trademarks”) used or mentioned on this website are the property of their respective owners. The use of these Trademarks is solely for the purpose of identification, description, and contribution to the recognition of their respective owners. The inclusion of these Trademarks does not imply any endorsement, sponsorship, or affiliation with this website.

We respect intellectual property rights and strive to ensure that the use of Trademarks is accurate and lawful. If you are the owner of a Trademark and believe that its use on this website might infringe upon your rights, please contact us through the provided contact information. We will take prompt action in accordance with applicable laws and regulations.

By continuing to use this website, you indicate that you have read, understood, and agreed to abide by the terms of this Trademark Disclaimer.