CPAP Nasal Pillow Mask Full Set for AirFit P10, Replacement Kit for ResMed P10 with Frame, Headgear, Nasal Pillow and More

Product Information

We have improved the product without affecting its original function, please feel free to use it.
–The replacement nasal pillow for AirFit P10 is changed from the original double-layer to single-layer, which is more convenient to use and will not lead to the problem of inner layer bending. Besides, it is easier to clean the single-layer nasal pillow for AirFit P10 to reduce the possibility of bacteria breeding. The nasal pillow is embossed with L/R logos on one side to help you wear nasal pillow more quickly and conveniently in the dark.
–The material of the short tube is improved, reducing the elasticity of the short tube, making it harder and stronger, not easy to pierce.
–The frame for AirFit P10 is designed with different structures but remains the same wearing angle as wearing the original one, allowing airflow to enter the nasal cavity smoothly. What’s more, we have retained and improved the original mesh design, enabling it to vent out the air more gently and make less noisy than other pillows.
–Left and right logos are added to the side straps of the frame to help quick distinguish when wearing.

Features

• Replacemnt Pillow – More secure and stable, it does not move or slip easily in any sleeping position to allow smooth airflow.
• Upgraded Vent Holes – Vents out air from both sides – same as originals – but more gently to greatly reduce noise and condensation.
• Snug Fit & No Leaks – The whole set fits perfectly to create a great seal and avoid hissing sounds.
• Ensure Wearing Comfort – The 18.5inches tube owns a 360-degree swivel to help pivot the hose when turning around.

Specifications

Important Tips

1. Store the product in a dry place out of direct sunlight.
2. This product does not contain any hazardous substances and may be disposed of with your normal household refuse.
3. This product does not contain natural latex.
4. Discontinue using this nasal pillow if you have any adverse reaction to the use of the nasal pillow, and consult your physician or sleep therapist.
5. The nasal pillow should not be used unless the device is turned on. Once the nasal pillow is fitted, ensure the device is blowing air, Rebreathing of exhaled air for several minutes can, in some circumstances, lead to suffocation.
6. Please do not use ozone disinfection equipment to disinfect this product.
7. Users who are unable to remove the mask by themselves must use the mask under supervision. The mask may not be suitable for those predisposed to aspiration.

FAQ

Noisy while wearing?

Vent is blocked or partially blocked. – Use a soft bristle brush to clean the vent.
Vent is wet. – Ensure the vent is dry before use to prevent condensation.
There’s grease on the nasal pillow. – Please clean the nasal pillow after each use to remove the facial grease on it.

Nasal pillow leaks or uncomfortable?

Choose the wrong size of nasal pillow. – Please select the appropriate size for snug fit.
Nasal pillow is collapsed. – Please squeeze it to restore original shape.

Short tube leaks?

Tube is not properly installed. – Please check whether the two ends of the short tube are installed in place.
Short tube is damaged. – Replace the damaged short tube with a new one.

Leaks between breathing tube and short tube?

Incorrect diameter of breathing tube. – The short tube is compatible with 22mm breathing tube.
Breathing hose is aging. – Please replace the breathing hose according to the time recommended by the supplier.

Product Instruction

Step1: Pinch the clips of the nasal pillow and push them into the slot on the frame to fix the nasal pillow. Please pay attention to the difference between long and short clips.
Step2: With the gray side of the headgear facing outward, lead the frame into the opening of the headgear and fix headgear around the nodes.
Step3: Pull the headgear over your head and split the bands to better fit your head. (The short tube will sag naturally if wearing nasal pillow properly.)
Step4: Connect the short tube to the breathing hose. The short tube can not be directly connected to the CPAP machine.

-Trademark and Brand Disclaimer-

The trademarks, logos, and brand names (collectively referred to as “Trademarks”) used or mentioned on this website are the property of their respective owners. The use of these Trademarks is solely for the purpose of identification, description, and contribution to the recognition of their respective owners. The inclusion of these Trademarks does not imply any endorsement, sponsorship, or affiliation with this website.

We respect intellectual property rights and strive to ensure that the use of Trademarks is accurate and lawful. If you are the owner of a Trademark and believe that its use on this website might infringe upon your rights, please contact us through the provided contact information. We will take prompt action in accordance with applicable laws and regulations.

By continuing to use this website, you indicate that you have read, understood, and agreed to abide by the terms of this Trademark Disclaimer.