CPAP Frame System for ResMed AirFit F20 and AirTouch F20, Frame Headgear Elbow Assembly for AirFit and AirTouch F20(without Full Face Mask)

CPAP Frame System for ResMed AirFit F20 and AirTouch F20, Frame Headgear Elbow Assembly for AirFit and AirTouch F20(without Full Face Mask)

Replacement Frame Elbow Assembly Kit for ResMed AirFit F20/AirTouch F20, Full Set of Frame Elbow Kit Compatible with AirFit F20, Snugly Fit & Improve Wearing Comfort

View Promotion


  • frame-elbow-kit



Free Shipping


(Estimated Shipping Time: 3-7 Days)

Product Information

Our CPAP Frame System is compatible with ResMed AirFit F20 and AirTouch F20;
We have improved the structure of the elbow, enabling it to rotate freely left and right, but not to shake up and down.
It also retains the same function of rotating 360 degrees and the same structure of vent holes and anti-suffocation valve as the original. CPAP Frame System for ResMed AirFit F20 and AirTouch F20.
Warning: Magnets are used in the AirFit F20 CPAP Frame System. Ensure the frame is kept at least 6” away from any active medical implant to avoid possible effects from localized magnetic fields. The magnetic field strength is less than 400mT.


  • Snugly fit & Hold in place: Snugly fit and ensure a good seal to keep your cu-shion from sliding during the night.
  • Maximize comfort of wearing: Strap made of soft, smooth and elastic fabric to ensure wearing comfort. High-quality Vel-cro and clips to keep strap in place and easy to adjust;
  • Quick-release elbow: Quick-release clips Can be quickly disconnected from the mask, which is convenient and quick to separate the tube from the mask.
  • Effective reduce red marks: Strap covers can add comfort and are really helpful in reducing red marks, facial irri-tation. Wake up without red marks.
  • Sufficient force: The clips have a strong attraction force so they can firmly connect and keep strap and mask in place.


Package Dimensions8.74 x 8.39 x 3.15inches;
Item Weight3.84 Ounces;
CompatibilityCompatible With ResMed AirTouch F20 & AirFit F20;
Package Include1 Frame & 1 Headstrap for AirFit F20 & 1 Pair Magnetic clips & 1 Elbow;
Replacement frequency3-6 months;

Important Tips

  1. If the pillow is worn correctly, the pillow and frame should fit correctly, showing an equilateral triangle.
  2. Please put on the pillow first to avoid wrinkles or folds caused by movement.
  3. The elbow is a whole and cannot be disassembled, please do not try to disassemble the elbow.
  4. The installed elbow should rotate smoothly. If there is air leakage, it may be that the elbow is not pushed into the frame correctly, please check again whether the elbow is installed properly.


It makes noise when wearing?

Possible 1: Vent is blocked or partially blocked. Use a soft bristle brush to clean the vents.
Possible 2: Vent is wet. Ensure the vent is dry before use to prevent condensation.
Possible 3: Headgear is too loose. Readjust headgear straps or change to a smaller size of headgear.

It leaks air between hose and the short tube?

Possible 1: The diameter of breathing hose is incorrect. The short tube is compatible with 22mm breathing hoses. Please check the diameter of the breathing hose connector.
Possible 2: The breathing hose is aging. The aging of breathing hose will lead to a loss of elasticity at the connection. Please replace the breathing hose according to the time recommend by the supplier.

It leaks air at the short tube?

Possible 1: Please check whether the two ends of the short tube are properly installed, and if necessary, remove and reinstall;
Possible 2: Replace the damaged short tube with a new one.

Product Instruction

Before first use, please clean the product as mentioned in the Cleaning Section.
: Lead the strap covers through frame arms and fix;
Step2: Fix the mask and frame together;
Step3: Lead the upper headgear straps through frame slot and attach the fastening tabs. Lead the lower headgear strap through the magnetic clip and attach the fastening tabs.
Step4: Hold the mask against your face and pull the headgear over your head.
Step5: Attach the magnetic clips on the lower headgear to magnetic base on the frame.
Step6: Adjust headgear strap until mask snugly and firmly fits your face, and attach the fastening tabs.
Step7: Connect hose with elbow, and push elbow into the frame. The elbow can rotate smoothly if it is installes correctly.

-Trademark and Brand Disclaimer-

The trademarks, logos, and brand names (collectively referred to as “Trademarks”) used or mentioned on this website are the property of their respective owners. The use of these Trademarks is solely for the purpose of identification, description, and contribution to the recognition of their respective owners. The inclusion of these Trademarks does not imply any endorsement, sponsorship, or affiliation with this website.

We respect intellectual property rights and strive to ensure that the use of Trademarks is accurate and lawful. If you are the owner of a Trademark and believe that its use on this website might infringe upon your rights, please contact us through the provided contact information. We will take prompt action in accordance with applicable laws and regulations.

By continuing to use this website, you indicate that you have read, understood, and agreed to abide by the terms of this Trademark Disclaimer.


Valid Period Code Number Amount Conditions of Use
2023/04/10- -20% Unset
2023/04/10- -15% Minimum Amount: 59.99